EspHome

config/kontroller-kocheg-a16.yaml

@@ -1,436 +0,0 @@
-esphome:
-  name: kontroller-kocheg-a16
-  friendly_name: Kontroller_Kocheg_a16
-
-esp32:
-  board: esp32dev
-  framework:
-    type: esp-idf
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-  encryption:
-    key: "cjSokZz0SdHshCFIhZ2m/kz9nyKzVDhK4IP3GXeuPe4="
-
-ota:
-  - platform: esphome
-    password: "b8cd17679860ec655bec01d924f92a91"
-
-ethernet:
-  type: LAN8720
-  mdc_pin: GPIO23
-  mdio_pin: GPIO18
-  clk_mode: GPIO17_OUT
-  phy_addr: 0
-  use_address: 192.168.88.25
-
-  manual_ip:
-    static_ip: 192.168.88.25
-    gateway: 192.168.88.1
-    subnet: 255.255.255.0
-
-# wifi:
-#   # ssid: !secret wifi_ssid
-#   # password: !secret wifi_password
-#   ssid: "SmartHome"
-#   password: ""
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  # ap:
-  #   ssid: "Kc868-A16 Fallback Hotspot"
-  #   password: "gCJlyJ5kec3y"
-
-
-uart:
-  - id: uart_modbus
-    tx_pin: GPIO13
-    rx_pin: GPIO16
-    baud_rate: 9600
-
-
-# Config Modbus
-modbus:
-  uart_id: uart_modbus
-  id: modbus1
-
-modbus_controller:
-  - id: modbus_sensor
-    address: 0x01  # device address
-    modbus_id: modbus1
-    update_interval: 10s
-
-remote_receiver:
-  pin:
-    number: GPIO2
-    ignore_strapping_warning: true
-
-remote_transmitter:
-  pin:
-    number: GPIO15
-    ignore_strapping_warning: true
-  carrier_duty_percent: 100%
-
-i2c:
-  sda: GPIO4
-  scl:
-    number: GPIO5
-    ignore_strapping_warning: true
-
-pcf8574:
-  - id: inputs_1_8
-    address: 0x22
-    pcf8575: false
-  - id: inputs_9_16
-    address: 0x21
-    pcf8575: false
-  - id: outputs_1_8
-    address: 0x24
-    pcf8575: false
-  - id: outputs_9_16
-    address: 0x25
-    pcf8575: false
-
-
-one_wire:
-  - platform: gpio
-    pin: GPIO32
-    id: bus32
-
-
-binary_sensor:
-  - platform: gpio
-    name: "KC868-A16-HT2"
-    pin:
-      number: GPIO33
-      inverted: true
-
-  - platform: gpio
-    name: "KC868-A16-HT3"
-    pin:
-      number: GPIO14
-      inverted: true
-
-  - platform: gpio
-    name: "input1_veranda_osv"
-    pin:
-      pcf8574: inputs_1_8
-      number: 0
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "input2_veranda_stolb_krylco"
-    pin:
-      pcf8574: inputs_1_8
-      number: 1
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "input3_veranda_osvechen"
-    pin:
-      pcf8574: inputs_1_8
-      number: 2
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "input4_krylco_veranda"
-    pin:
-      pcf8574: inputs_1_8
-      number: 3
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "input5_krylco_stolb"
-    pin:
-      pcf8574: inputs_1_8
-      number: 4
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "input6_krylco_osv"
-    pin:
-      pcf8574: inputs_1_8
-      number: 5
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "input7_veranda_rozetka"
-    pin:
-      pcf8574: inputs_1_8
-      number: 6
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "input8_podval_osv"
-    pin:
-      pcf8574: inputs_1_8
-      number: 7
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "input9_nasos"
-    pin:
-      pcf8574: inputs_9_16
-      number: 0
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "input10_boiler"
-    pin:
-      pcf8574: inputs_9_16
-      number: 1
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "KC868-A16-X11"
-    pin:
-      pcf8574: inputs_9_16
-      number: 2
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "KC868-A16-X12"
-    pin:
-      pcf8574: inputs_9_16
-      number: 3
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "KC868-A16-X13"
-    pin:
-      pcf8574: inputs_9_16
-      number: 4
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "KC868-A16-X14"
-    pin:
-      pcf8574: inputs_9_16
-      number: 5
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "KC868-A16-X15"
-    pin:
-      pcf8574: inputs_9_16
-      number: 6
-      mode: INPUT
-      inverted: true
-
-  - platform: gpio
-    name: "KC868-A16-X16"
-    pin:
-      pcf8574: inputs_9_16
-      number: 7
-      mode: INPUT
-      inverted: true
-
-
-switch:
-  - platform: gpio
-    name: "Output01_podval_boiler"
-    id: out_y01
-    pin:
-      pcf8574: outputs_1_8
-      number: 0
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output02_podval_nasos"
-    id: out_y02
-    pin:
-      pcf8574: outputs_1_8
-      number: 1
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output03_podval_svet"
-    id: out_y03
-    pin:
-      pcf8574: outputs_1_8
-      number: 2
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output04_veranda_svet"
-    id: out_y04
-    pin:
-      pcf8574: outputs_1_8
-      number: 3
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output05_teplica"
-    id: out_y05
-    pin:
-      pcf8574: outputs_1_8
-      number: 4
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output06_podsvetka"
-    id: out_y06
-    pin:
-      pcf8574: outputs_1_8
-      number: 5
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output07_stolb"
-    id: out_y07
-    pin:
-      pcf8574: outputs_1_8
-      number: 6
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output08_rozetka"
-    id: out_y08
-    pin:
-      pcf8574: outputs_1_8
-      number: 7
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output09"
-    id: out_y09
-    pin:
-      pcf8574: outputs_9_16
-      number: 0
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output10"
-    id: out_y10
-    pin:
-      pcf8574: outputs_9_16
-      number: 1
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output11"
-    id: out_y11
-    pin:
-      pcf8574: outputs_9_16
-      number: 2
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output12"
-    id: out_y12
-    pin:
-      pcf8574: outputs_9_16
-      number: 3
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output13"
-    id: out_y13
-    pin:
-      pcf8574: outputs_9_16
-      number: 4
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output14"
-    id: out_y14
-    pin:
-      pcf8574: outputs_9_16
-      number: 5
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output15"
-    id: out_y15
-    pin:
-      pcf8574: outputs_9_16
-      number: 6
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "Output16"
-    id: out_y16
-    pin:
-      pcf8574: outputs_9_16
-      number: 7
-      mode: OUTPUT
-      inverted: true
-
-# substitutions:
-#   update_interval: 1s
-
-sensor:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_sensor
-    name: "Temperature Sensor"
-    id: temperature_sensor
-    address: 0x0001
-    register_type: read
-    value_type: U_WORD
-    unit_of_measurement: "°C"
-    accuracy_decimals: 1
-    filters:
-      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
-
-   
-  - platform: modbus_controller
-    modbus_controller_id: modbus_sensor
-    name: "Humidity Sensor"
-    id: humidity_sensor
-    address: 0x0002
-    register_type: read
-    value_type: U_WORD
-    unit_of_measurement: "%"
-    accuracy_decimals: 1
-    filters:
-      - multiply: 0.1
-
-  - platform: dallas_temp
-    one_wire_id: bus32
-    name: "DS18B20"
-    update_interval: 30s
-
-
-# web_server:
-#   port: 80
-#   auth:
-#     username: "silver"
-#     password: "cbvgcjy0"
-
-mqtt:
-  broker: 192.168.88.4
-  username: 'miroca'
-  password: 'cbvgcjy0'
-  discovery: False # disable entity discovery
-  discover_ip: True # enable device discovery