EspHome

2025-08-19 00:12:47 +05:00
parent 95f9370302
commit 2baf2f209c
12 changed files with 110 additions and 1043 deletions
--- a/config/test-kc868-a16.yaml
+++ b/config/test-kc868-a16.yaml
@@ -1,114 +0,0 @@
-esphome:
-  name: test-kc868-a16
-  friendly_name: Test-KC868-A16
-
-esp32:
-  board: esp32dev
-  framework:
-    type: esp-idf
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-  encryption:
-    key: "D/MuChEBR8XVbCR8SpQIml+bxj3Huh5tKlwLpZ1QqeU="
-
-ota:
-  - platform: esphome
-    password: "df5a4ea7cc6a8b628f781e27751c43cf"
-
-# ethernet:
-#   type: LAN8720
-#   mdc_pin: GPIO23
-#   mdio_pin: GPIO18
-#   clk_mode: GPIO17_OUT
-#   phy_addr: 0
-#   use_address: 192.168.88.25
-
-wifi:
-  # ssid: !secret wifi_ssid
-  # password: !secret wifi_password
-  ssid: "SmartHome"
-  password: ""
-  use_address: 192.168.88.172
-
-  manual_ip:
-    static_ip: 192.168.88.172
-    gateway: 192.168.88.1
-    subnet: 255.255.255.0
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  # ap:
-  #   ssid: "Kc868-A16 Fallback Hotspot"
-  #   password: "gCJlyJ5kec3y"
-
-
-uart:
-  - id: uart_modbus
-    tx_pin: GPIO13
-    rx_pin: GPIO16
-    baud_rate: 9600
-
-remote_receiver:
-  pin:
-    number: GPIO2
-    ignore_strapping_warning: true
-
-remote_transmitter:
-  pin:
-    number: GPIO15
-    ignore_strapping_warning: true
-  carrier_duty_percent: 100%
-
-i2c:
-  sda: GPIO4
-  scl:
-    number: GPIO5
-    ignore_strapping_warning: true
-
-# Config Modbus
-modbus:
-  uart_id: uart_modbus
-  id: modbus1
-
-modbus_controller:
-  - id: modbus_sensor
-    address: 0x01  # device address
-    modbus_id: modbus1
-    update_interval: 10s
-
-sensor:
-  - platform: modbus_controller
-    modbus_controller_id: modbus_sensor
-    name: "RS485 Temperature Sensor"
-    id: temperature_sensor
-    address: 0x0001
-    register_type: read
-    value_type: U_WORD
-    unit_of_measurement: "°C"
-    accuracy_decimals: 1
-    filters:
-      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
-
-   
-  - platform: modbus_controller
-    modbus_controller_id: modbus_sensor
-    name: "RS485 Humidity Sensor"
-    id: humidity_sensor
-    address: 0x0002
-    register_type: read
-    value_type: U_WORD
-    unit_of_measurement: "%"
-    accuracy_decimals: 1
-    filters:
-      - multiply: 0.1
-
-
-
-web_server:
-  port: 80
-  auth:
-    username: "silver"
-    password: "cbvgcjy0"