EspHome

2025-08-19 00:12:47 +05:00
parent 95f9370302
commit 2baf2f209c
12 changed files with 110 additions and 1043 deletions
--- a/test-kc868-a16.yaml
+++ b/test-kc868-a16.yaml
@@ -0,0 +1,114 @@
+esphome:
+  name: test-kc868-a16
+  friendly_name: Test-KC868-A16
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "D/MuChEBR8XVbCR8SpQIml+bxj3Huh5tKlwLpZ1QqeU="
+
+ota:
+  - platform: esphome
+    password: "df5a4ea7cc6a8b628f781e27751c43cf"
+
+# ethernet:
+#   type: LAN8720
+#   mdc_pin: GPIO23
+#   mdio_pin: GPIO18
+#   clk_mode: GPIO17_OUT
+#   phy_addr: 0
+#   use_address: 192.168.88.25
+
+wifi:
+  # ssid: !secret wifi_ssid
+  # password: !secret wifi_password
+  ssid: "SmartHome"
+  password: ""
+  use_address: 192.168.88.172
+
+  manual_ip:
+    static_ip: 192.168.88.172
+    gateway: 192.168.88.1
+    subnet: 255.255.255.0
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  # ap:
+  #   ssid: "Kc868-A16 Fallback Hotspot"
+  #   password: "gCJlyJ5kec3y"
+
+
+uart:
+  - id: uart_modbus
+    tx_pin: GPIO13
+    rx_pin: GPIO16
+    baud_rate: 9600
+
+remote_receiver:
+  pin:
+    number: GPIO2
+    ignore_strapping_warning: true
+
+remote_transmitter:
+  pin:
+    number: GPIO15
+    ignore_strapping_warning: true
+  carrier_duty_percent: 100%
+
+i2c:
+  sda: GPIO4
+  scl:
+    number: GPIO5
+    ignore_strapping_warning: true
+
+# Config Modbus
+modbus:
+  uart_id: uart_modbus
+  id: modbus1
+
+modbus_controller:
+  - id: modbus_sensor
+    address: 0x01  # device address
+    modbus_id: modbus1
+    update_interval: 10s
+
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: modbus_sensor
+    name: "RS485 Temperature Sensor"
+    id: temperature_sensor
+    address: 0x0001
+    register_type: read
+    value_type: U_WORD
+    unit_of_measurement: "°C"
+    accuracy_decimals: 1
+    filters:
+      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
+
+   
+  - platform: modbus_controller
+    modbus_controller_id: modbus_sensor
+    name: "RS485 Humidity Sensor"
+    id: humidity_sensor
+    address: 0x0002
+    register_type: read
+    value_type: U_WORD
+    unit_of_measurement: "%"
+    accuracy_decimals: 1
+    filters:
+      - multiply: 0.1
+
+
+
+web_server:
+  port: 80
+  auth:
+    username: "silver"
+    password: "cbvgcjy0"