html

archive/esp01s.yaml

@@ -0,0 +1,96 @@
+esphome:
+  name: heart
+
+esp8266:
+  board: esp01_1m
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "+N0FoP/8Iai5hBYZv5EEd2/uZypPe1nvQSskIOo8aeA="
+
+ota:
+  - platform: esphome
+    password: "cf4259c67a56c86316e14d48ff6e867f"
+
+wifi:
+  ssid: "SmartHome"
+  password: ""
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    # ssid: "Gas-Kitchen Fallback Hotspot"
+    # password: "0n8oXqMAAFPU"
+
+  use_address: 192.168.88.32
+
+  manual_ip:
+    static_ip: 192.168.88.32
+    gateway: 192.168.88.1
+    subnet: 255.255.255.0
+
+captive_portal:
+
+switch:
+  - platform: gpio
+    pin: GPIO0
+    name: "Heart switch"
+    inverted: true
+
+  # The following can be omitted
+  - platform: restart
+    name: ${devicename} restart
+
+sensor:
+  - platform: wifi_signal
+    name: ${devicename} wifi signal
+    update_interval: 600s
+
+  # human readable uptime sensor output to the text sensor above
+  - platform: uptime
+    name: ${devicename} Uptime in Days
+    id: uptime_sensor_days
+    update_interval: 60s
+    on_raw_value:
+      then:
+        - text_sensor.template.publish:
+            id: uptime_human
+            state: !lambda |-
+              int seconds = round(id(uptime_sensor_days).raw_state);
+              int days = seconds / (24 * 3600);
+              seconds = seconds % (24 * 3600);
+              int hours = seconds / 3600;
+              seconds = seconds % 3600;
+              int minutes = seconds /  60;
+              seconds = seconds % 60;
+              return (
+                (days ? String(days) + "d " : "") +
+                (hours ? String(hours) + "h " : "") +
+                (minutes ? String(minutes) + "m " : "") +
+                (String(seconds) + "s")
+              ).c_str();
+
+time:
+  - platform: homeassistant
+    id: homeassistant_time
+
+# Text sensors with general information.
+text_sensor:
+  # Expose ESPHome version as sensor.
+  - platform: version
+    name: $devicename Version
+  # Expose WiFi information as sensors.
+  - platform: wifi_info
+    ip_address:
+      name: $devicename IP
+    bssid:
+      name: $devicename BSSID
+
+  # human readable update text sensor from sensor:uptime
+  - platform: template
+    name: Uptime Human Readable
+    id: uptime_human
+    icon: mdi:clock-start