Docker chown -R 1000:1000 /path/to/esphome

test-kc868-a16.yaml

@@ -1,6 +1,6 @@
 esphome:
-  name: test-kc868-a16
-  friendly_name: Test-KC868-A16
+  name: vanna-kc868-a6
+  friendly_name: Vanna-KC868-A6
 
 esp32:
   board: esp32dev
@@ -47,8 +47,8 @@ wifi:
 
 uart:
   - id: uart_modbus
-    tx_pin: GPIO13
-    rx_pin: GPIO16
+    tx_pin: GPIO27
+    rx_pin: GPIO14
     baud_rate: 9600
 
 remote_receiver:
@@ -56,16 +56,10 @@ remote_receiver:
     number: GPIO2
     ignore_strapping_warning: true
 
-remote_transmitter:
-  pin:
-    number: GPIO15
-    ignore_strapping_warning: true
-  carrier_duty_percent: 100%
-
 i2c:
   sda: GPIO4
   scl:
-    number: GPIO5
+    number: GPIO15
     ignore_strapping_warning: true
 
 # Config Modbus
@@ -77,7 +71,7 @@ modbus_controller:
   - id: modbus_sensor
     address: 0x01  # device address
     modbus_id: modbus1
-    update_interval: 10s
+    update_interval: 2s
 
 sensor:
   - platform: modbus_controller
@@ -85,12 +79,18 @@ sensor:
     name: "RS485 Temperature Sensor"
     id: temperature_sensor
     address: 0x0001
-    register_type: read
-    value_type: U_WORD
+    # register_type: read
+    # value_type: U_WORD
+    # unit_of_measurement: "°C"
+    # accuracy_decimals: 1
+    # filters:
+    #   - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
     unit_of_measurement: "°C"
+    register_type: read
+    value_type: S_WORD
     accuracy_decimals: 1
     filters:
-      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
+      - multiply: 0.1
 
    
   - platform: modbus_controller
@@ -107,8 +107,8 @@ sensor:
 
 
 
-web_server:
-  port: 80
-  auth:
-    username: "silver"
-    password: "cbvgcjy0"
+# web_server:
+#   port: 80
+#   auth:
+#     username: "silver"
+#     password: "cbvgcjy0"