Docker chown -R 1000:1000 /path/to/esphome

.gitignore

@@ -3,4 +3,3 @@
 # You can modify this file to suit your needs.
 /.esphome/
 /secrets.yaml
-/.idea

gas-kitchen-wemos.yaml

@@ -1,6 +1,7 @@
 esphome:
   name: gas-kitchen-wemos
   friendly_name: Gas_Kitchen_WeMos
+  
 
 esp8266:
   board: esp01_1m
@@ -17,6 +18,8 @@ ota:
   - platform: esphome
     password: "8028833c244a6ebdc6f44b8506ead784"
 
+    
+
   
 wifi:
   ssid: "SmartHome"
@@ -43,9 +46,9 @@ wifi:
     # dns1: 8.8.8.8
     # dns2: 8.8.4.4
 
-captive_portal:
 
-# MQ2 Smoke Gas Sensor
+
+# # MQ2 Smoke Gas Sensor
 sensor:
   - platform: adc
     pin: A0
@@ -56,6 +59,8 @@ sensor:
     filters:
       - multiply: 100
 
+
+
 # web_server:
 #   port: 80
 #   auth:

kc868-a6.yaml

@@ -40,7 +40,7 @@ uart:
     tx_pin: GPIO27
     rx_pin: GPIO14
     baud_rate: 9600
-    stop_bits: 1
+    # stop_bits: 1
 
 
     #RS2332
@@ -215,8 +215,8 @@ sensor:
     modbus_controller_id: modbus_sensor
     name: "Temperature SHT30"
     id: temperature_sensor
-    address: 0x0000
-    register_type: holding
+    address: 0x0001
+    register_type: read
     value_type: U_WORD
     unit_of_measurement: "°C"
     accuracy_decimals: 1
@@ -227,8 +227,8 @@ sensor:
     modbus_controller_id: modbus_sensor
     name: "Humidity_SHT30"
     id: humidity_sensor
-    address: 0x0001
-    register_type: holding
+    address: 0x0002
+    register_type: read
     value_type: U_WORD
     unit_of_measurement: "%"
     accuracy_decimals: 1
@@ -237,11 +237,11 @@ sensor:
 
     
 
-# web_server:
-#   port: 80
-#   auth:
-#     username: "silver"
-#     password: "cbvgcjy0"
+web_server:
+  port: 80
+  auth:
+    username: "silver"
+    password: "cbvgcjy0"
 
 mqtt:
   broker: 192.168.88.4

kontroller-kocheg-a16.yaml

@@ -442,12 +442,19 @@ sensor:
     name: "Temperature Sensor"
     id: temperature_sensor
     address: 0x0001
-    register_type: read
-    value_type: U_WORD
+    # register_type: read
+    # value_type: U_WORD
+    # unit_of_measurement: "°C"
+    # accuracy_decimals: 1
+    # filters:
+    #   - lambda: if (x < 10000) return x * 0.1; else return -1 * x * 0.0001;
     unit_of_measurement: "°C"
+    register_type: read
+    value_type: S_WORD
     accuracy_decimals: 1
     filters:
-      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
+      - multiply: 0.1
+
 
    
   - platform: modbus_controller

kontroller-kocheg-a8.yaml

@@ -1,6 +1,6 @@
 esphome:
   name: kontroller-kocheg-a8
-  friendly_name: Kontroller_Kocheg_a8
+  friendly_name: kocheg_a8
 
 esp32:
   board: esp32dev
@@ -73,7 +73,7 @@ switch:
       inverted: true
 
   - platform: gpio
-    name: "a8-output4"
+    name: "close_gas"
     pin:
       pcf8574: pcf8574_hub_out_1
       number: 3
@@ -81,7 +81,7 @@ switch:
       inverted: true
 
   - platform: gpio
-    name: "a8-output5"
+    name: "open_gas"
     pin:
       pcf8574: pcf8574_hub_out_1
       number: 4

test-kc868-a16.yaml

@@ -1,6 +1,6 @@
 esphome:
-  name: test-kc868-a16
-  friendly_name: Test-KC868-A16
+  name: vanna-kc868-a6
+  friendly_name: Vanna-KC868-A6
 
 esp32:
   board: esp32dev
@@ -47,8 +47,8 @@ wifi:
 
 uart:
   - id: uart_modbus
-    tx_pin: GPIO13
-    rx_pin: GPIO16
+    tx_pin: GPIO27
+    rx_pin: GPIO14
     baud_rate: 9600
 
 remote_receiver:
@@ -56,16 +56,10 @@ remote_receiver:
     number: GPIO2
     ignore_strapping_warning: true
 
-remote_transmitter:
-  pin:
-    number: GPIO15
-    ignore_strapping_warning: true
-  carrier_duty_percent: 100%
-
 i2c:
   sda: GPIO4
   scl:
-    number: GPIO5
+    number: GPIO15
     ignore_strapping_warning: true
 
 # Config Modbus
@@ -77,7 +71,7 @@ modbus_controller:
   - id: modbus_sensor
     address: 0x01  # device address
     modbus_id: modbus1
-    update_interval: 10s
+    update_interval: 2s
 
 sensor:
   - platform: modbus_controller
@@ -85,12 +79,18 @@ sensor:
     name: "RS485 Temperature Sensor"
     id: temperature_sensor
     address: 0x0001
-    register_type: read
-    value_type: U_WORD
+    # register_type: read
+    # value_type: U_WORD
+    # unit_of_measurement: "°C"
+    # accuracy_decimals: 1
+    # filters:
+    #   - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
     unit_of_measurement: "°C"
+    register_type: read
+    value_type: S_WORD
     accuracy_decimals: 1
     filters:
-      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
+      - multiply: 0.1
 
    
   - platform: modbus_controller
@@ -107,8 +107,8 @@ sensor:
 
 
 
-web_server:
-  port: 80
-  auth:
-    username: "silver"
-    password: "cbvgcjy0"
+# web_server:
+#   port: 80
+#   auth:
+#     username: "silver"
+#     password: "cbvgcjy0"