From 86f2ea4b02a1233a9c0ea76490d80c71e6153148 Mon Sep 17 00:00:00 2001
From: Victor Alexandrovich Tsyrenschikov
 <77172321+tsyrenschikov@users.noreply.github.com>
Date: Wed, 16 Jul 2025 00:16:55 +0500
Subject: [PATCH] EspHome

---
 .gitignore     |   1 +
 kc868-a16.yaml | 420 +++++++++++++++++++++++++++++++++++++++++++++++++
 kc868-a6.yaml  | 217 +++++++++++++++++++++++++
 kc868-a8.yaml  | 203 ++++++++++++++++++++++++
 4 files changed, 841 insertions(+)
 create mode 100644 kc868-a16.yaml
 create mode 100644 kc868-a6.yaml
 create mode 100644 kc868-a8.yaml

diff --git a/.gitignore b/.gitignore
index 36b13f1..a51f3bc 100644
--- a/.gitignore
+++ b/.gitignore
@@ -174,3 +174,4 @@ cython_debug/
 # PyPI configuration file
 .pypirc
 
+/.idea/
\ No newline at end of file
diff --git a/kc868-a16.yaml b/kc868-a16.yaml
new file mode 100644
index 0000000..855f4e4
--- /dev/null
+++ b/kc868-a16.yaml
@@ -0,0 +1,420 @@
+esphome:
+  name: kontroller_kochegarka
+  friendly_name: KC868-A16
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "b59KOqOrvn/NFCIyInQdhWFXlODKAVGn7xtj9h/N4Rc="
+
+ota:
+  - platform: esphome
+    password: "36b59390fed54e38bd8fea5722e9358f"
+
+ethernet:
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO17_OUT
+  phy_addr: 0
+  use_address: 192.168.10.214
+
+# wifi:
+#   ssid: !secret wifi_ssid
+#   password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  # ap:
+  #   ssid: "Kc868-A16 Fallback Hotspot"
+  #   password: "gCJlyJ5kec3y"
+
+uart:
+  - id: uart_modbus
+    tx_pin: GPIO13
+    rx_pin: GPIO16
+    baud_rate: 9600
+
+remote_receiver:
+  pin:
+    number: GPIO2
+    ignore_strapping_warning: true
+
+remote_transmitter:
+  pin:
+    number: GPIO15
+    ignore_strapping_warning: true
+  carrier_duty_percent: 100%
+
+# Config Modbus
+modbus:
+  uart_id: uart_modbus
+  id: modbus1
+
+modbus_controller:
+  - id: modbus_sensor
+    address: 0x01  # device address
+    modbus_id: modbus1
+
+i2c:
+  sda: GPIO4
+  scl:
+    number: GPIO5
+    ignore_strapping_warning: true
+
+pcf8574:
+  - id: inputs_1_8
+    address: 0x22
+    pcf8575: false
+  - id: inputs_9_16
+    address: 0x21
+    pcf8575: false
+  - id: outputs_1_8
+    address: 0x24
+    pcf8575: false
+  - id: outputs_9_16
+    address: 0x25
+    pcf8575: false
+
+binary_sensor:
+  - platform: gpio
+    name: "KC868-A16-HT1"
+    pin:
+      number: GPIO32
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-HT2"
+    pin:
+      number: GPIO33
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-HT3"
+    pin:
+      number: GPIO14
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X01"
+    pin:
+      pcf8574: inputs_1_8
+      number: 0
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X02"
+    pin:
+      pcf8574: inputs_1_8
+      number: 1
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X03"
+    pin:
+      pcf8574: inputs_1_8
+      number: 2
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X04"
+    pin:
+      pcf8574: inputs_1_8
+      number: 3
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X05"
+    pin:
+      pcf8574: inputs_1_8
+      number: 4
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X06"
+    pin:
+      pcf8574: inputs_1_8
+      number: 5
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X07"
+    pin:
+      pcf8574: inputs_1_8
+      number: 6
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X08"
+    pin:
+      pcf8574: inputs_1_8
+      number: 7
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X09"
+    pin:
+      pcf8574: inputs_9_16
+      number: 0
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X10"
+    pin:
+      pcf8574: inputs_9_16
+      number: 1
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X11"
+    pin:
+      pcf8574: inputs_9_16
+      number: 2
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X12"
+    pin:
+      pcf8574: inputs_9_16
+      number: 3
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X13"
+    pin:
+      pcf8574: inputs_9_16
+      number: 4
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X14"
+    pin:
+      pcf8574: inputs_9_16
+      number: 5
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X15"
+    pin:
+      pcf8574: inputs_9_16
+      number: 6
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-X16"
+    pin:
+      pcf8574: inputs_9_16
+      number: 7
+      mode: INPUT
+      inverted: true
+
+
+switch:
+  - platform: gpio
+    name: "KC868-A16-Y01"
+    id: out_y01
+    pin:
+      pcf8574: outputs_1_8
+      number: 0
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y02"
+    id: out_y02
+    pin:
+      pcf8574: outputs_1_8
+      number: 1
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y03"
+    id: out_y03
+    pin:
+      pcf8574: outputs_1_8
+      number: 2
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y04"
+    id: out_y04
+    pin:
+      pcf8574: outputs_1_8
+      number: 3
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y05"
+    id: out_y05
+    pin:
+      pcf8574: outputs_1_8
+      number: 4
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y06"
+    id: out_y06
+    pin:
+      pcf8574: outputs_1_8
+      number: 5
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y07"
+    id: out_y07
+    pin:
+      pcf8574: outputs_1_8
+      number: 6
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y08"
+    id: out_y08
+    pin:
+      pcf8574: outputs_1_8
+      number: 7
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y09"
+    id: out_y09
+    pin:
+      pcf8574: outputs_9_16
+      number: 0
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y10"
+    id: out_y10
+    pin:
+      pcf8574: outputs_9_16
+      number: 1
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y11"
+    id: out_y11
+    pin:
+      pcf8574: outputs_9_16
+      number: 2
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y12"
+    id: out_y12
+    pin:
+      pcf8574: outputs_9_16
+      number: 3
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y13"
+    id: out_y13
+    pin:
+      pcf8574: outputs_9_16
+      number: 4
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y14"
+    id: out_y14
+    pin:
+      pcf8574: outputs_9_16
+      number: 5
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y15"
+    id: out_y15
+    pin:
+      pcf8574: outputs_9_16
+      number: 6
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "KC868-A16-Y16"
+    id: out_y16
+    pin:
+      pcf8574: outputs_9_16
+      number: 7
+      mode: OUTPUT
+      inverted: true
+
+# substitutions:
+#   update_interval: 1s
+
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: modbus_sensor
+    name: "Temperature SHT30"
+    id: temperature_sensor
+    address: 0x0000
+    register_type: holding
+    value_type: U_WORD
+    unit_of_measurement: "°C"
+    accuracy_decimals: 1
+    filters:
+      - throttle_average: 1s
+      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
+# - throttle_average: ${update_interval}
+    
+  - platform: modbus_controller
+    modbus_controller_id: modbus_sensor
+    name: "Humidity_SHT30"
+    id: humidity_sensor
+    address: 0x0001
+    register_type: holding
+    value_type: U_WORD
+    unit_of_measurement: "%"
+    accuracy_decimals: 1
+    filters:
+      - throttle_average: 1s
+      - multiply: 0.1
+# - throttle_average: ${update_interval}
+    
+
+web_server:
+  port: 80
+
+mqtt:
+  broker: 192.168.88.4
+  username: 'miroca'
+  password: 'cbvgcjy0'
+  discovery: False # disable entity discovery
+  discover_ip: True # enable device discovery
\ No newline at end of file
diff --git a/kc868-a6.yaml b/kc868-a6.yaml
new file mode 100644
index 0000000..08ece99
--- /dev/null
+++ b/kc868-a6.yaml
@@ -0,0 +1,217 @@
+esphome:
+  name: ventilation
+  friendly_name: KC868-A6
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "/Tq+moXS9oIsH4e7/QMtww6zqAdP23DCzeTaM+6KxdM="
+
+ota:
+  - platform: esphome
+    password: "64c599445a6dddc9a3cfc44a1413086e"
+
+wifi:
+  ssid: 'SmartHome'
+  password: ''
+  use_address: 192.168.88.192
+
+  manual_ip:
+    static_ip: 192.168.88.192
+    gateway: 192.168.88.1
+    subnet: 255.255.255.0
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  # ap:
+  #   ssid: "Kc868-A6 Fallback Hotspot"
+  #   password: "Eqh4eO1YIQUi"
+
+uart:
+    #RS485
+  - id: uart_modbus
+    tx_pin: GPIO27
+    rx_pin: GPIO14
+    baud_rate: 9600
+    stop_bits: 1
+
+
+    #RS2332
+  - id: rs232
+    tx_pin: GPIO17
+    rx_pin: GPIO16
+    baud_rate: 9600
+
+spi:
+  clk_pin: GPIO18
+  mosi_pin: GPIO23
+  miso_pin: GPIO19
+  # cs pin: GPIO5
+
+modbus:
+  uart_id: uart_modbus
+  id: modbus1
+
+modbus_controller:
+  - id: modbus_sensor
+    address: 0x01  # device address
+    modbus_id: modbus1
+
+i2c:
+  sda: GPIO4
+  scl:
+    number: GPIO15
+    ignore_strapping_warning: true
+
+pcf8574:
+  - id: inputs
+    address: 0x22
+  - id: outputs
+    address: 0x24
+
+time:
+  - platform: ds1307
+    id: rtc_time
+
+
+binary_sensor:
+  - platform: gpio
+    name: "KC868-A6-IN-1"
+    pin:
+      pcf8574: inputs
+      number: 0
+      mode: INPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-IN-2"
+    pin:
+      pcf8574: inputs
+      number: 1
+      mode: INPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-IN-3"
+    pin:
+      pcf8574: inputs
+      number: 2
+      mode: INPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-IN-4"
+    pin:
+      pcf8574: inputs
+      number: 3
+      mode: INPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-IN-5"
+    pin:
+      pcf8574: inputs
+      number: 4
+      mode: INPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-IN-6"
+    pin:
+      pcf8574: inputs
+      number: 5
+      mode: INPUT
+      inverted: true
+
+switch:
+  - platform: gpio
+    name: "KC868-A6-RELAY-1"
+    id: relay_1
+    pin:
+      pcf8574: outputs
+      number: 0
+      mode: OUTPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-RELAY-2"
+    id: relay_2
+    pin:
+      pcf8574: outputs
+      number: 1
+      mode: OUTPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-RELAY-3"
+    id: relay_3
+    pin:
+      pcf8574: outputs
+      number: 2
+      mode: OUTPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-RELAY-4"
+    id: relay_4
+    pin:
+      pcf8574: outputs
+      number: 3
+      mode: OUTPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-RELAY-5"
+    id: relay_5
+    pin:
+      pcf8574: outputs
+      number: 4
+      mode: OUTPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-RELAY-6"
+    id: relay_6
+    pin:
+      pcf8574: outputs
+      number: 5
+      mode: OUTPUT
+      inverted: true
+
+sensor:
+  - platform: modbus_controller
+    modbus_controller_id: modbus_sensor
+    name: "Temperature SHT30"
+    id: temperature_sensor
+    address: 0x0000
+    register_type: holding
+    value_type: U_WORD
+    unit_of_measurement: "°C"
+    accuracy_decimals: 1
+    filters:
+      - throttle_average: 1s
+      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
+# - throttle_average: ${update_interval}
+    
+  - platform: modbus_controller
+    modbus_controller_id: modbus_sensor
+    name: "Humidity_SHT30"
+    id: humidity_sensor
+    address: 0x0001
+    register_type: holding
+    value_type: U_WORD
+    unit_of_measurement: "%"
+    accuracy_decimals: 1
+    filters:
+      - throttle_average: 1s
+      - multiply: 0.1
+# - throttle_average: ${update_interval}
+
+    
+
+web_server:
+  port: 80
+
+mqtt:
+  broker: 192.168.88.4
+  username: 'miroca'
+  password: 'cbvgcjy0'
+  discovery: False # disable entity discovery
+  discover_ip: True # enable device discovery
\ No newline at end of file
diff --git a/kc868-a8.yaml b/kc868-a8.yaml
new file mode 100644
index 0000000..0c35417
--- /dev/null
+++ b/kc868-a8.yaml
@@ -0,0 +1,203 @@
+esphome:
+  name: kc868-a8
+  friendly_name: KC868-A8
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "3iphXwtysZ+BHDKmxmTnXKCjASbfFW+W1r6la1n9OIA="
+
+ota:
+  - platform: esphome
+    password: "402f0dc3631f8d2379d60af0df352763"
+
+# wifi:
+  # ssid: !secret wifi_ssid
+  # password: !secret wifi_password
+
+  # # Enable fallback hotspot (captive portal) in case wifi connection fails
+  # ap:
+  #   ssid: "Kc868-A8 Fallback Hotspot"
+  #   password: "II3iptTzripY"
+
+
+i2c:
+  sda: 4
+  scl: 5
+  scan: true
+  id: bus_a
+
+ethernet:
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO18
+  clk_mode: GPIO17_OUT
+  phy_addr: 0
+
+pcf8574:
+  - id: 'pcf8574_hub_out_1'  # for output channel 1-8
+    address: 0x24
+
+  - id: 'pcf8574_hub_in_1'  # for input channel 1-8
+    address: 0x22
+
+# Individual outputs
+switch:
+  - platform: gpio
+    name: "a8-light1"
+    pin:
+      pcf8574: pcf8574_hub_out_1
+      number: 0
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-light2"
+    pin:
+      pcf8574: pcf8574_hub_out_1
+      number: 1
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-light3"
+    pin:
+      pcf8574: pcf8574_hub_out_1
+      number: 2
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-light4"
+    pin:
+      pcf8574: pcf8574_hub_out_1
+      number: 3
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-light5"
+    pin:
+      pcf8574: pcf8574_hub_out_1
+      number: 4
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-light6"
+    pin:
+      pcf8574: pcf8574_hub_out_1
+      number: 5
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-light7"
+    pin:
+      pcf8574: pcf8574_hub_out_1
+      number: 6
+      mode: OUTPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-light8"
+    pin:
+      pcf8574: pcf8574_hub_out_1
+      number: 7
+      mode: OUTPUT
+      inverted: true
+
+binary_sensor:
+  - platform: gpio
+    name: "a8-input1"
+    pin:
+      pcf8574: pcf8574_hub_in_1
+      number: 0
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-input2"
+    pin:
+      pcf8574: pcf8574_hub_in_1
+      number: 1
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-input3"
+    pin:
+      pcf8574: pcf8574_hub_in_1
+      number: 2
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-input4"
+    pin:
+      pcf8574: pcf8574_hub_in_1
+      number: 3
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-input5"
+    pin:
+      pcf8574: pcf8574_hub_in_1
+      number: 4
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-input6"
+    pin:
+      pcf8574: pcf8574_hub_in_1
+      number: 5
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-input7"
+    pin:
+      pcf8574: pcf8574_hub_in_1
+      number: 6
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-input8"
+    pin:
+      pcf8574: pcf8574_hub_in_1
+      number: 7
+      mode: INPUT
+      inverted: true
+
+  - platform: gpio
+    name: "a8-s3"
+    pin:
+      number: 32
+      inverted: true
+
+  - platform: gpio
+    name: "a8-s4"
+    pin:
+      number: 33
+      inverted: true
+
+one_wire:
+  - platform: gpio
+    pin: GPIO14
+
+sensor:
+  - platform: dallas_temp
+    address: 0x1c0000031edd2a28 #replace with your sensor's ID
+    name: "ds18b20-1"
+