EspHome

config/kontroller-kocheg-a16.yaml

@@ -50,6 +50,18 @@ uart:
     rx_pin: GPIO16
     baud_rate: 9600
 
+
+# Config Modbus
+modbus:
+  uart_id: uart_modbus
+  id: modbus1
+
+modbus_controller:
+  - id: modbus_sensor
+    address: 0x01  # device address
+    modbus_id: modbus1
+    update_interval: 10s
+
 remote_receiver:
   pin:
     number: GPIO2
@@ -158,7 +170,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: "KC868-A16-X08"
+    name: "input8_podval_osv"
     pin:
       pcf8574: inputs_1_8
       number: 7
@@ -166,7 +178,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: "KC868-A16-X09"
+    name: "input9_nasos"
     pin:
       pcf8574: inputs_9_16
       number: 0
@@ -174,7 +186,7 @@ binary_sensor:
       inverted: true
 
   - platform: gpio
-    name: "KC868-A16-X10"
+    name: "input10_boiler"
     pin:
       pcf8574: inputs_9_16
       number: 1
@@ -232,7 +244,7 @@ binary_sensor:
 
 switch:
   - platform: gpio
-    name: "Output01"
+    name: "Output01_podval_boiler"
     id: out_y01
     pin:
       pcf8574: outputs_1_8
@@ -241,7 +253,7 @@ switch:
       inverted: true
 
   - platform: gpio
-    name: "Output02"
+    name: "Output02_podval_nasos"
     id: out_y02
     pin:
       pcf8574: outputs_1_8
@@ -250,7 +262,7 @@ switch:
       inverted: true
 
   - platform: gpio
-    name: "Output03"
+    name: "Output03_podval_svet"
     id: out_y03
     pin:
       pcf8574: outputs_1_8
@@ -379,6 +391,31 @@ switch:
 #   update_interval: 1s
 
 sensor:
+  - platform: modbus_controller
+    modbus_controller_id: modbus_sensor
+    name: "Temperature Sensor"
+    id: temperature_sensor
+    address: 0x0001
+    register_type: read
+    value_type: U_WORD
+    unit_of_measurement: "°C"
+    accuracy_decimals: 1
+    filters:
+      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
+
+   
+  - platform: modbus_controller
+    modbus_controller_id: modbus_sensor
+    name: "Humidity Sensor"
+    id: humidity_sensor
+    address: 0x0002
+    register_type: read
+    value_type: U_WORD
+    unit_of_measurement: "%"
+    accuracy_decimals: 1
+    filters:
+      - multiply: 0.1
+
   - platform: dallas_temp
     one_wire_id: bus32
     name: "DS18B20"