Esphome

esp32-c3-mini.yaml

@@ -85,6 +85,28 @@ sensor:
     i2c_id: bus_a
     address: 0x76
     update_interval: 1s
+
+# - platform: gpio
+#     id: switch_output1
+#     name: "a8-output1"
+#     pin:
+#       pcf8574: pcf8574_hub_out_1
+#       number: 0
+#       mode: OUTPUT
+#       inverted: true
+
+
+switch:
+  - platform: gpio
+    id: switch_output1
+    pin: GPIO5
+    inverted: True
+    
+
+binary_sensor:
+  - platform: gpio
+    name: "Pin GPIO21"
+    pin: GPIO21
   
 web_server:
   port: 80

esp8266.yaml

@@ -0,0 +1,67 @@
+esphome:
+  name: komp_vitya
+  friendly_name: esp8266
+
+esp8266:
+  board: esp12e
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "DLO/jlbPutpVyTwKB5fP7oO36K58yiLzU0Fpw0ZN/hM="
+
+ota:
+  - platform: esphome
+    password: "f98db3b86ae6f19b2d1aec85ee5f5bcd"
+
+wifi:
+  ssid: 'SmartHome'
+  password: ''
+  use_address: 192.168.88.39
+
+  manual_ip:
+    static_ip: 192.168.88.39
+    gateway: 192.168.88.1
+    subnet: 255.255.255.0
+  power_save_mode: none
+
+captive_portal:
+
+status_led:
+  pin:
+    number: GPIO16
+    inverted: True
+  
+switch:
+  - platform: gpio
+    pin: GPIO5
+    name: Relay_komp
+    id: relay
+    on_turn_off:
+      then:
+        - wait_until:
+            condition:
+              for:
+                time: 2s
+                condition:
+                  lambda: |-
+                    return id(relay).state == true;
+        - lambda: |-
+            id(relay).turn_off();
+
+
+mqtt:
+  broker: 192.168.88.4
+  username: 'miroca'
+  password: 'cbvgcjy0'
+  discovery: False # disable entity discovery
+  discover_ip: True # enable device discovery
+
+web_server:
+  port: 80
+  auth:
+    username: "silver"
+    password: "cbvgcjy0"

gas-kitchen-wemos.yaml

@@ -24,13 +24,6 @@ ota:
 wifi:
   ssid: "SmartHome"
   password: ""
-  # networks:
-  #   ssid: "SmartHome"
-  #   password: ""
-  #   bssid: 78:9A:18:88:E0:79
-  #   channel: 1
-  power_save_mode: none
-  
 
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:

kc868-a6.yaml

@@ -211,26 +211,26 @@ switch:
       inverted: true
 
 sensor:
-  - platform: ina219
+  # - platform: ina219
-    address: 0x40
+  #   address: 0x40
-    shunt_resistance: 0.1 ohm
+  #   shunt_resistance: 0.1 ohm
-    current:
+  #   current:
-      name: "INA219 Current"
+  #     name: "INA219 Current"
-      unit_of_measurement: "A"
+  #     unit_of_measurement: "A"
-    power:
+  #   power:
-      name: "INA219 Power"
+  #     name: "INA219 Power"
-      unit_of_measurement: "W"
+  #     unit_of_measurement: "W"
-      filters:
+  #     filters:
-      - multiply: 10
+  #     - multiply: 10
-    bus_voltage:
+  #   bus_voltage:
-      name: "INA219 Bus Voltage"
+  #     name: "INA219 Bus Voltage"
-      unit_of_measurement: "V"
+  #     unit_of_measurement: "V"
-    shunt_voltage:
+  #   shunt_voltage:
-      name: "INA219 Shunt Voltage"
+  #     name: "INA219 Shunt Voltage"
-      unit_of_measurement: "V"
+  #     unit_of_measurement: "V"
-    max_voltage: 32.0V
+  #   max_voltage: 32.0V
-    max_current: 3.2A
+  #   max_current: 3.2A
-    update_interval: 1s
+  #   update_interval: 1s
     
   - platform: modbus_controller
     modbus_controller_id: modbus_sensor
@@ -256,7 +256,6 @@ sensor:
     filters:
       - multiply: 0.1
 
-    
 
 web_server:
   port: 80

kontroller-kocheg-a16.yaml

@@ -437,6 +437,16 @@ switch:
 #   update_interval: 1s
 
 sensor:
+  # - platform: adc
+  #   pin: A0
+  #   name: "Flame Detector QRB1"
+  #   update_interval: 1s
+  #   unit_of_measurement: "V"
+  #   filters:
+  #     # Опционально: инверсия или калибровка
+  #     # Чем выше вольтаж, тем интенсивнее пламя
+  #     - multiply: 1.0 
+
   - platform: ina219
     address: 0x40
     shunt_resistance: 0.1 ohm

kontroller-kocheg-a8.yaml

@@ -38,6 +38,20 @@ ethernet:
     gateway: 192.168.88.1
     subnet: 255.255.255.0
 
+remote_receiver:
+  pin: 15
+  dump:
+    - rc_switch
+  tolerance: 100%
+  filter: 250us
+  idle: 4ms
+  buffer_size: 4kb
+
+remote_transmitter:
+  pin: 2
+  # RF uses a 100% carrier signal
+  carrier_duty_percent: 100%
+
 pcf8574:
   - id: 'pcf8574_hub_out_1'  # for output channel 1-8
     address: 0x24
@@ -49,6 +63,7 @@ pcf8574:
 # Individual outputs
 switch:
   - platform: gpio
+    id: switch_output1
     name: "a8-output1"
     pin:
       pcf8574: pcf8574_hub_out_1
@@ -57,6 +72,7 @@ switch:
       inverted: true
 
   - platform: gpio
+    id: switch_output2
     name: "a8-output2"
     pin:
       pcf8574: pcf8574_hub_out_1
@@ -65,6 +81,7 @@ switch:
       inverted: true
 
   - platform: gpio
+    id: switch_output3
     name: "a8-output3"
     pin:
       pcf8574: pcf8574_hub_out_1
@@ -73,6 +90,7 @@ switch:
       inverted: true
 
   - platform: gpio
+    id: switch_output4
     name: "close_gas"
     pin:
       pcf8574: pcf8574_hub_out_1
@@ -81,6 +99,7 @@ switch:
       inverted: true
 
   - platform: gpio
+    id: switch_output5
     name: "open_gas"
     pin:
       pcf8574: pcf8574_hub_out_1
@@ -89,6 +108,7 @@ switch:
       inverted: true
 
   - platform: gpio
+    id: switch_output6
     name: "a8-output6"
     pin:
       pcf8574: pcf8574_hub_out_1
@@ -97,6 +117,7 @@ switch:
       inverted: true
 
   - platform: gpio
+    id: switch_output7
     name: "a8-output7"
     pin:
       pcf8574: pcf8574_hub_out_1
@@ -105,6 +126,7 @@ switch:
       inverted: true
 
   - platform: gpio
+    id: switch_output8
     name: "a8-output8"
     pin:
       pcf8574: pcf8574_hub_out_1
@@ -113,6 +135,28 @@ switch:
       inverted: true
 
 binary_sensor:
+  - platform: remote_receiver
+    name: "remoter1"
+    rc_switch_raw:
+      protocol: 3
+      code: '000000111110110100001'
+    # on_press:
+    #     - switch.turn_off: switch_output7
+    #     - switch.turn_on: switch_output6
+    filters:
+      - delayed_off: 20ms
+
+  - platform: remote_receiver
+    name: "remoter2"
+    rc_switch_raw:
+      protocol: 3
+      code: '000000111110110100010'
+    # on_press:
+    #   - switch.turn_off: switch_output6
+    #   - switch.turn_on: switch_output7
+    filters:
+      - delayed_off: 20ms
+      
   - platform: gpio
     name: "a8-input1"
     pin:

small-home.yaml

@@ -33,6 +33,21 @@ wifi:
     gateway: 192.168.88.1
     subnet: 255.255.255.0
 
+remote_receiver:
+  pin: 15
+  dump:
+    - rc_switch
+  tolerance: 100%
+  filter: 250us
+  idle: 4ms
+  buffer_size: 4kb
+
+remote_transmitter:
+  pin: 2
+  # RF uses a 100% carrier signal
+  carrier_duty_percent: 100%
+
+
 
 i2c:
   sda: 4
@@ -138,6 +153,29 @@ switch:
       inverted: true
 
 binary_sensor:
+  - platform: remote_receiver
+    name: "remoter1"
+    rc_switch_raw:
+      protocol: 3
+      code: '000000111110110100001'
+    on_press:
+        - switch.turn_off: switch_output7
+        - switch.turn_on: switch_output6
+    filters:
+      - delayed_off: 20ms
+
+  - platform: remote_receiver
+    name: "remoter2"
+    rc_switch_raw:
+      protocol: 3
+      code: '000000111110110100010'
+
+    on_press:
+      - switch.turn_off: switch_output6
+      - switch.turn_on: switch_output7
+    filters:
+      - delayed_off: 20ms
+
   - platform: gpio
     name: "a8-input1"
     pin:
@@ -148,10 +186,8 @@ binary_sensor:
     on_press:
       - switch.toggle: switch_output1
     on_release: 
-      - switch.toggle: switch_output1
+      - switch.toggle: switch_output1      
         
-        
-
   - platform: gpio
     name: "a8-input2"
     pin: