esphome:
  name: vanna-kc868-a6
  friendly_name: Vanna-KC868-A6

esp32:
  board: esp32dev
  framework:
    type: esp-idf

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "D/MuChEBR8XVbCR8SpQIml+bxj3Huh5tKlwLpZ1QqeU="

ota:
  - platform: esphome
    password: "df5a4ea7cc6a8b628f781e27751c43cf"

# ethernet:
#   type: LAN8720
#   mdc_pin: GPIO23
#   mdio_pin: GPIO18
#   clk_mode: GPIO17_OUT
#   phy_addr: 0
#   use_address: 192.168.88.25

wifi:
  # ssid: !secret wifi_ssid
  # password: !secret wifi_password
  ssid: "SmartHome"
  password: ""
  use_address: 192.168.88.172

  manual_ip:
    static_ip: 192.168.88.172
    gateway: 192.168.88.1
    subnet: 255.255.255.0

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  # ap:
  #   ssid: "Kc868-A16 Fallback Hotspot"
  #   password: "gCJlyJ5kec3y"


uart:
  - id: uart_modbus
    tx_pin: GPIO27
    rx_pin: GPIO14
    baud_rate: 9600

remote_receiver:
  pin:
    number: GPIO2
    ignore_strapping_warning: true

i2c:
  sda: GPIO4
  scl:
    number: GPIO15
    ignore_strapping_warning: true

# Config Modbus
modbus:
  uart_id: uart_modbus
  id: modbus1

modbus_controller:
  - id: modbus_sensor
    address: 0x01  # device address
    modbus_id: modbus1
    update_interval: 2s

sensor:
  - platform: modbus_controller
    modbus_controller_id: modbus_sensor
    name: "RS485 Temperature Sensor"
    id: temperature_sensor
    address: 0x0001
    # register_type: read
    # value_type: U_WORD
    # unit_of_measurement: "°C"
    # accuracy_decimals: 1
    # filters:
    #   - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;
    unit_of_measurement: "°C"
    register_type: read
    value_type: S_WORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1

   
  - platform: modbus_controller
    modbus_controller_id: modbus_sensor
    name: "RS485 Humidity Sensor"
    id: humidity_sensor
    address: 0x0002
    register_type: read
    value_type: U_WORD
    unit_of_measurement: "%"
    accuracy_decimals: 1
    filters:
      - multiply: 0.1



# web_server:
#   port: 80
#   auth:
#     username: "silver"
#     password: "cbvgcjy0"