esphome:
  name: relay_auto_bak
  friendly_name: bak

esp8266:
  board: esp12e

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "DLO/jlbPutpVyTwKB5fP7oO36K58yiLzU0Fpw0ZN/hM="

ota:
  - platform: esphome
    password: "f98db3b86ae6f19b2d1aec85ee5f5bcd"
  
wifi:
  id: wifi_component
  ssid: 'SmartHome'
  password: ''
  use_address: 192.168.88.39

  manual_ip:
    static_ip: 192.168.88.39
    gateway: 192.168.88.1
    subnet: 255.255.255.0
  power_save_mode: none

  # ap:
  #   ssid: "Miroca"
  #   password: "" # Можно оставить пустым для быстрого входа

captive_portal:


status_led:
  pin:
    number: GPIO16
    inverted: True
    
  
switch:
  - platform: gpio
    pin: 
      number: GPIO5
      inverted: true
    name: Relay
    id: relay

# sensor:
#   - platform: adc
#     pin: A0 # Replace A0 with the actual GPIO pin you are using
#     name: "CT Clamp Raw Voltage"
#     id: ct_raw_voltage
#     update_interval: 100ms
#     internal: True

#   - platform: ct_clamp
#     sensor: ct_raw_voltage
#     id: measured_current
#     name: "Grid Current"
#     update_interval: 2s
#     # This filter line is for calibration. You need to adjust the multiplier 
#     # based on your specific hardware setup and measurements.
#     filters:
#       - calibrate_linear:
#           - 0.001 -> 0.0
#           - 1.000 -> 100.0 # Example: if 1V input corresponds to 100A
#     unit_of_measurement: "A"
#     accuracy_decimals: 2

#   - platform: template
#     name: "Measured Power (Apparent)"
#     unit_of_measurement: "W"
#     id: measured_power
#     device_class: power
#     update_interval: 2s
#     # Умножение тока на фиксированное напряжение сети (например, 220В)
#     lambda: |-
#       return id(measured_current).state * 230.0;
    
# binary_sensor:
#   - platform: gpio
#     pin:
#       number: GPIO12
#       mode:
#         input: true
#     device_class: moisture
#     name: Liquid_sensor_upper

# mqtt:
#   broker: 192.168.88.4
#   username: 'miroca'
#   password: 'cbvgcjy0'
#   discovery: False # disable entity discovery
#   discover_ip: True # enable device discovery

web_server:
  port: 80
  version: 3
  auth:
    username: "silver"
    password: "cbvgcjy0"
  js_url: 'https://miroca.ru/static/file/upanel/js/esphome.js'