esphome:
  name: generator
  friendly_name: generator

esp32:
  board: esp32dev
  framework:
    type: esp-idf

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "/EFz4JsOw/FQu2RGJEmHg9+xm5/UdBeNbTd6mQbDN/U="

ota:
  - platform: esphome
    password: "0dac1ac3f1bae5208cc8ea81356da792"

wifi:
  ssid: "SmartHome"
  password: ""
  use_address: 192.168.88.27
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  # ap:
  #   ssid: "Kc868-A8 Fallback Hotspot"
  #   password: "gCJlyJ5kec3y"
  
  manual_ip:
    static_ip: 192.168.88.27
    gateway: 192.168.88.1
    subnet: 255.255.255.0

remote_receiver:
  pin: 15
  dump:
    - rc_switch
  tolerance: 100%
  filter: 250us
  idle: 4ms
  buffer_size: 4kb

remote_transmitter:
  pin: 2
  # RF uses a 100% carrier signal
  carrier_duty_percent: 100%



i2c:
  sda: 4
  scl: 5
  scan: true
  id: bus_a

# ethernet:
#   type: LAN8720
#   mdc_pin: GPIO23
#   mdio_pin: GPIO18
#   clk_mode: GPIO17_OUT
#   phy_addr: 0
#   use_address: 192.168.88.27

#   manual_ip:
#     static_ip: 192.168.88.27
#     gateway: 192.168.88.1
#     subnet: 255.255.255.0
#     dns1: 192.168.88.1

pcf8574:
  - id: 'pcf8574_hub_out_1'  # for output channel 1-8
    address: 0x24

  - id: 'pcf8574_hub_in_1'  # for input channel 1-8
    address: 0x22


# Individual outputs
switch:
  - platform: gpio
    name: "a8-output1"
    id: switch_output1
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 0
      mode: OUTPUT
      inverted: true


  - platform: gpio
    name: "a8-output2"
    id: switch_output2
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 1
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "a8-output3"
    id: switch_output3
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 2
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "a8-output4"
    id: switch_output4
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 3
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "a8-output5"
    id: switch_output5
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 4
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "a8-output6"
    id: switch_output6
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 5
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "a8-output7"
    id: switch_output7
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 6
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "a8-output8"
    id: switch_output8
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 7
      mode: OUTPUT
      inverted: true

binary_sensor:
  - platform: remote_receiver
    name: "remoter1"
    rc_switch_raw:
      protocol: 3
      code: '000000111110110100001'
    on_press:
        - switch.turn_off: switch_output7
        - switch.turn_on: switch_output6
    filters:
      - delayed_off: 20ms

  - platform: remote_receiver
    name: "remoter2"
    rc_switch_raw:
      protocol: 3
      code: '000000111110110100010'

    on_press:
      - switch.turn_off: switch_output6
      - switch.turn_on: switch_output7
    filters:
      - delayed_off: 20ms

  - platform: gpio
    name: "a8-input1"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 0
      mode: INPUT
      inverted: true
    on_press:
      - switch.toggle: switch_output1
    on_release: 
      - switch.toggle: switch_output1      
        
  - platform: gpio
    name: "a8-input2"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 1
      mode: INPUT
      inverted: true
    on_press:
      - switch.toggle: switch_output2
    on_release: 
      - switch.toggle: switch_output2  

  - platform: gpio
    name: "a8-input3"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 2
      mode: INPUT
      inverted: true
    on_press:
      - switch.toggle: switch_output3
    on_release: 
      - switch.toggle: switch_output3

  - platform: gpio
    name: "a8-input4"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 3
      mode: INPUT
      inverted: true
    on_press:
      - switch.toggle: switch_output4
    on_release: 
      - switch.toggle: switch_output4

  - platform: gpio
    name: "a8-input5"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 4
      mode: INPUT
      inverted: true
    on_press:
      - switch.toggle: switch_output5
    on_release: 
      - switch.toggle: switch_output5

  - platform: gpio
    name: "a8-input6"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 5
      mode: INPUT
      inverted: true
    on_press:
      - switch.toggle: switch_output6
    on_release: 
      - switch.toggle: switch_output6

  - platform: gpio
    name: "a8-input7"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 6
      mode: INPUT
      inverted: true
    on_press:
      - switch.toggle: switch_output7
    on_release: 
      - switch.toggle: switch_output7

  - platform: gpio
    name: "a8-input8"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 7
      mode: INPUT
      inverted: true
    on_press:
      - switch.toggle: switch_output8
    on_release: 
      - switch.toggle: switch_output8

  - platform: gpio
    name: "a8-s3"
    pin:
      number: 32
      inverted: true

  - platform: gpio
    name: "a8-s4"
    pin:
      number: 33
      inverted: true


one_wire:
  - platform: gpio
    pin: GPIO14
    id: bus14
  
sensor:
  - platform: ina219
    address: 0x40
    shunt_resistance: 0.1 ohm
    current:
      name: "INA219 Current"
      unit_of_measurement: "A"
    power:
      name: "INA219 Power"
      unit_of_measurement: "W"
      filters:
      - multiply: 10
    bus_voltage:
      name: "INA219 Bus Voltage"
      unit_of_measurement: "V"
    shunt_voltage:
      name: "INA219 Shunt Voltage"
      unit_of_measurement: "V"
    max_voltage: 32.0V
    max_current: 3.2A
    update_interval: 1s

  - platform: dallas_temp
    one_wire_id: bus14
    name: "DS18B20"
    update_interval: 2s
    on_value_range: 
      - above: 27.0
        then:
          - delay: 10s
          - switch.turn_on: switch_output8
      - below: 26.5
        then:
          - delay: 10s
          - switch.turn_off: switch_output8
    

web_server:
  port: 80
  auth:
    username: "silver"
    password: "cbvgcjy0"


# mqtt:
#   broker: 192.168.88.4
#   username: 'miroca'
#   password: 'cbvgcjy0'
#   discovery: False # disable entity discovery
#   discover_ip: True # enable device discovery