esphome:
  name: heart

esp8266:
  board: esp01_1m

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "+N0FoP/8Iai5hBYZv5EEd2/uZypPe1nvQSskIOo8aeA="

ota:
  - platform: esphome
    password: "cf4259c67a56c86316e14d48ff6e867f"

wifi:
  ssid: "SmartHome"
  password: ""

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    # ssid: "Gas-Kitchen Fallback Hotspot"
    # password: "0n8oXqMAAFPU"

  use_address: 192.168.88.32

  manual_ip:
    static_ip: 192.168.88.32
    gateway: 192.168.88.1
    subnet: 255.255.255.0

captive_portal:

switch:
  - platform: gpio
    pin: GPIO0
    name: "Heart switch"
    inverted: true

  # The following can be omitted
  - platform: restart
    name: ${devicename} restart

sensor:
  - platform: wifi_signal
    name: ${devicename} wifi signal
    update_interval: 600s

  # human readable uptime sensor output to the text sensor above
  - platform: uptime
    name: ${devicename} Uptime in Days
    id: uptime_sensor_days
    update_interval: 60s
    on_raw_value:
      then:
        - text_sensor.template.publish:
            id: uptime_human
            state: !lambda |-
              int seconds = round(id(uptime_sensor_days).raw_state);
              int days = seconds / (24 * 3600);
              seconds = seconds % (24 * 3600);
              int hours = seconds / 3600;
              seconds = seconds % 3600;
              int minutes = seconds /  60;
              seconds = seconds % 60;
              return (
                (days ? String(days) + "d " : "") +
                (hours ? String(hours) + "h " : "") +
                (minutes ? String(minutes) + "m " : "") +
                (String(seconds) + "s")
              ).c_str();

time:
  - platform: homeassistant
    id: homeassistant_time

# Text sensors with general information.
text_sensor:
  # Expose ESPHome version as sensor.
  - platform: version
    name: $devicename Version
  # Expose WiFi information as sensors.
  - platform: wifi_info
    ip_address:
      name: $devicename IP
    bssid:
      name: $devicename BSSID

  # human readable update text sensor from sensor:uptime
  - platform: template
    name: Uptime Human Readable
    id: uptime_human
    icon: mdi:clock-start