esphome:
  name: gasoline-generator
  friendly_name: gasoline_generator

esp8266:
  board: esp12e

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "L4re6nsOL621xgrtSi2fMJPg/NmKyDh+V1/T1NYODvA="

ota:
  - platform: esphome
    password: "99f726ebd009fcb5849ad70ab052ed74"

wifi:
  ssid: 'SmartHome'
  password: ''
  use_address: 192.168.88.40

  manual_ip:
    static_ip: 192.168.88.40
    gateway: 192.168.88.1
    subnet: 255.255.255.0
  power_save_mode: none

captive_portal:
    
# Use the blue LED in the device as a status LED, which will blink if there are warnings (slow) or errors (fast)
status_led:
  pin:
    number: GPIO5
    inverted: True

binary_sensor:
  # - platform: gpio
  #   name: "Input_Start_Generator"
  #   pin: 
  #     number: GPIO2 # Пин, к которому подключена кнопка
  #     mode: INPUT_PULLUP
  #     inverted: True # Полезно, если кнопка замыкает на землю (GND)
  #   on_press:
  #     - switch.toggle: pump
    # on_release: 
    #   - switch.toggle: start_generator
  - platform: gpio
    id: "sw420_vibration"
    name: vibration
    pin:
      number: GPIO2
      mode: INPUT
    device_class: vibration
    filters:
     - delayed_off: 5s

switch:
  - platform: gpio
    pin: GPIO16
    name: Start_generator
    id: start_generator  
    on_turn_off:
      then:
        - wait_until:
            condition:
              for:
                time: 3s
                condition:
                  lambda: |-
                    return id(start_generator).state == true;
        - lambda: |-
            id(start_generator).turn_off();

  - platform: gpio
    pin: GPIO14
    name: Pump
    id: pump
    on_turn_on: 
      then:
        - delay: 2000ms
        - switch.toggle: air_Damper
        - delay: 2000ms 
        - switch.toggle: start_generator
    on_turn_off:
      then:
        - wait_until:
            condition:
              for:
                time: 5s
                condition:
                  lambda: |-
                    return id(pump).state == true;
        - lambda: |-
            id(pump).turn_off();
        

  - platform: gpio
    pin: GPIO12
    name: Air_Damper
    id: air_Damper
    on_turn_off:
      then:
        - wait_until:
            condition:
              for:
                time: 2s
                condition:
                  lambda: |-
                    return id(air_Damper).state == true;
        - lambda: |-
            id(air_Damper).turn_off();

  - platform: gpio
    pin: GPIO13
    name: Relay4
    id: relay4

one_wire:
  - platform: gpio
    pin: GPIO4
    id: bus4

sensor:
  - platform: dallas_temp
    one_wire_id: bus4
    name: "Engine_Temperature"
    update_interval: 2s

# mqtt:
#   broker: 192.168.88.4
#   username: 'miroca'
#   password: 'cbvgcjy0'
#   discovery: False # disable entity discovery
#   discover_ip: True # enable device discovery

web_server:
  port: 80
  auth:
    username: "silver"
    password: "cbvgcjy0"