esphome:
  name: kontroller-kocheg-a8
  friendly_name: kocheg_a8

esp32:
  board: esp32dev
  framework:
    type: esp-idf

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "fLsIKyVhqlbxu8nVcb/Nn2nUoETpucfLcF6+G/sZDKw="

ota:
  - platform: esphome
    password: "1d28579639e8fc6e113c751c4cda7ff5"

i2c:
  sda: 4
  scl: 5
  scan: true
  id: bus_a

ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO18
  clk_mode: GPIO17_OUT
  phy_addr: 0
  use_address: 192.168.88.26

  manual_ip:
    static_ip: 192.168.88.26
    gateway: 192.168.88.1
    subnet: 255.255.255.0

remote_receiver:
  pin: 15
  dump:
    - rc_switch
  tolerance: 100%
  filter: 250us
  idle: 4ms
  buffer_size: 4kb

remote_transmitter:
  pin: 2
  # RF uses a 100% carrier signal
  carrier_duty_percent: 100%

pcf8574:
  - id: 'pcf8574_hub_out_1'  # for output channel 1-8
    address: 0x24

  - id: 'pcf8574_hub_in_1'  # for input channel 1-8
    address: 0x22


# Individual outputs
switch:
  - platform: gpio
    id: switch_output1
    name: "a8-output1"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 0
      mode: OUTPUT
      inverted: true

  - platform: gpio
    id: switch_output2
    name: "a8-output2"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 1
      mode: OUTPUT
      inverted: true

  - platform: gpio
    id: switch_output3
    name: "a8-output3"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 2
      mode: OUTPUT
      inverted: true

  - platform: gpio
    id: switch_output4
    name: "close_gas"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 3
      mode: OUTPUT
      inverted: true

  - platform: gpio
    id: switch_output5
    name: "open_gas"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 4
      mode: OUTPUT
      inverted: true

  - platform: gpio
    id: switch_output6
    name: "a8-output6"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 5
      mode: OUTPUT
      inverted: true

  - platform: gpio
    id: switch_output7
    name: "a8-output7"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 6
      mode: OUTPUT
      inverted: true

  - platform: gpio
    id: switch_output8
    name: "a8-output8"
    pin:
      pcf8574: pcf8574_hub_out_1
      number: 7
      mode: OUTPUT
      inverted: true

binary_sensor:
  - platform: remote_receiver
    name: "remoter1"
    rc_switch_raw:
      protocol: 3
      code: '000000111110110100001'
    # on_press:
    #     - switch.turn_off: switch_output7
    #     - switch.turn_on: switch_output6
    filters:
      - delayed_off: 20ms

  - platform: remote_receiver
    name: "remoter2"
    rc_switch_raw:
      protocol: 3
      code: '000000111110110100010'
    # on_press:
    #   - switch.turn_off: switch_output6
    #   - switch.turn_on: switch_output7
    filters:
      - delayed_off: 20ms
      
  - platform: gpio
    name: "a8-input1"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 0
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "a8-input2"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 1
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "a8-input3"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 2
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "a8-input4"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 3
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "a8-input5"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 4
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "a8-input6"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 5
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "a8-input7"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 6
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "a8-input8"
    pin:
      pcf8574: pcf8574_hub_in_1
      number: 7
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "a8-s3"
    pin:
      number: 32
      inverted: true

  - platform: gpio
    name: "a8-s4"
    pin:
      number: 33
      inverted: true

one_wire:
  - platform: gpio
    pin: GPIO14
    id: bus14

  - platform: gpio
    pin: GPIO13
    id: bus13

sensor:
  - platform: ina219
    address: 0x40
    shunt_resistance: 0.1 ohm
    current:
      name: "INA219 Current"
      unit_of_measurement: "A"
    power:
      name: "INA219 Power"
      unit_of_measurement: "W"
      filters:
      - multiply: 10
    bus_voltage:
      name: "INA219 Bus Voltage"
      unit_of_measurement: "V"
    shunt_voltage:
      name: "INA219 Shunt Voltage"
      unit_of_measurement: "V"
    max_voltage: 32.0V
    max_current: 3.2A
    update_interval: 1s
    

  - platform: dallas_temp
    one_wire_id: bus14
    name: "DS18B20_kontroller"
    update_interval: 10s

  - platform: dallas_temp
    one_wire_id: bus13
    name: "DS18B20_server"
    update_interval: 10s

# web_server:
#   port: 80
#   auth:
#     username: "silver"
#     password: "cbvgcjy0"
#   js_url: "http://192.168.88.4/static/file/upanel/js/esphome.js"

# mqtt:
#   broker: 192.168.88.4
#   username: 'miroca'
#   password: 'cbvgcjy0'
#   discovery: False # disable entity discovery
#   discover_ip: True # enable device discovery