esphome:
  name: esp32-c3
  friendly_name: ESP32-C3

esp32:
  board: esp32-c3-devkitm-1
  framework:
    type: esp-idf

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "LE0/9X2TSZLPQk4r+xCAQHtiSWQXyk1Lct50IggUlUs="

ota:
  - platform: esphome
    password: "614014afc2d80f6552a59442dd02de05"

wifi:
  ssid: 'SmartHome'
  password: ''
  use_address: 192.168.88.#

  manual_ip:
    static_ip: 192.168.88.#
    gateway: 192.168.88.1
    subnet: 255.255.255.0
  power_save_mode: none

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  # ap:
  #   ssid: "Esp32-C3-Mini Fallback Hotspot"
  #   password: "wuMGlIsDXN19"

one_wire:
  - platform: gpio
    pin: GPIO4
    id: bus1

i2c:
  - id: bus_a
    sda: GPIO6
    scl: GPIO7
    scan: true



captive_portal:

sensor:
  - platform: ina219
    address: 0x40
    shunt_resistance: 0.1 ohm
    current:
      name: "INA219 Current"
      unit_of_measurement: "A"
    power:
      name: "INA219 Power"
      unit_of_measurement: "W"
      filters:
      - multiply: 10
    bus_voltage:
      name: "INA219 Bus Voltage"
      unit_of_measurement: "V"
    shunt_voltage:
      name: "INA219 Shunt Voltage"
      unit_of_measurement: "V"
    max_voltage: 32.0V
    max_current: 3.2A
    update_interval: 1s

  - platform: dallas_temp
    one_wire_id: bus1
    name: "DS18B20"
    update_interval: 2s

  - platform: bme680
    i2c_id: bus_a
    address: 0x76
    update_interval: 1s

# - platform: gpio
#     id: switch_output1
#     name: "a8-output1"
#     pin:
#       pcf8574: pcf8574_hub_out_1
#       number: 0
#       mode: OUTPUT
#       inverted: true


switch:
  - platform: gpio
    id: switch_output1
    pin: GPIO5
    inverted: True
    

binary_sensor:
  - platform: gpio
    name: "Pin GPIO21"
    pin: GPIO21
  
web_server:
  port: 80
  auth:
    username: "silver"
    password: "cbvgcjy0"