esphome:
  name: test-wemos
  friendly_name: test_wemos

esp8266:
  board: esp01_1m

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "qEOA6hQaiz2eGOGyScJtwC7gGa1XyJEjw3qDShi529U="

ota:
  - platform: esphome
    password: "95d41c6e935db2827ae63c2afeafec40"

wifi:
  ssid: 'SmartHome'
  password: ''
  use_address: 192.168.88.29

  manual_ip:
    static_ip: 192.168.88.29
    gateway: 192.168.88.1
    subnet: 255.255.255.0
  power_save_mode: none

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  # ap:
  #   ssid: "Esp32-C3-Mini Fallback Hotspot"
  #   password: "wuMGlIsDXN19"

# one_wire:
#   - platform: gpio
#     pin: GPIO4
#     id: bus1

# i2c:
#   - id: bus_a
#     sda: GPIO6
#     scl: GPIO7
#     scan: true



captive_portal:

sensor:
  # - platform: ina219
  #   address: 0x40
  #   shunt_resistance: 0.1 ohm
  #   current:
  #     name: "INA219 Current"
  #     unit_of_measurement: "A"
  #   power:
  #     name: "INA219 Power"
  #     unit_of_measurement: "W"
  #     filters:
  #     - multiply: 10
  #   bus_voltage:
  #     name: "INA219 Bus Voltage"
  #     unit_of_measurement: "V"
  #   shunt_voltage:
  #     name: "INA219 Shunt Voltage"
  #     unit_of_measurement: "V"
  #   max_voltage: 32.0V
  #   max_current: 3.2A
  #   update_interval: 1s

  # - platform: dallas_temp
  #   one_wire_id: bus1
  #   name: "DS18B20"
  #   update_interval: 2s

  # - platform: bme680
  #   i2c_id: bus_a
  #   address: 0x76
  #   update_interval: 1s

# - platform: gpio
#     id: switch_output1
#     name: "a8-output1"
#     pin:
#       pcf8574: pcf8574_hub_out_1
#       number: 0
#       mode: OUTPUT
#       inverted: true


switch:
  - platform: gpio
    id: switch_output1
    pin: GPIO4
    inverted: True
    
  
web_server:
  port: 80
  auth:
    username: "silver"
    password: "cbvgcjy0"