esphome:
  name: kontroller-kocheg-a16
  friendly_name: Kontroller_Kocheg_a16

esp32:
  board: esp32dev
  framework:
    type: esp-idf

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "cjSokZz0SdHshCFIhZ2m/kz9nyKzVDhK4IP3GXeuPe4="

ota:
  - platform: esphome
    password: "b8cd17679860ec655bec01d924f92a91"

ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO18
  clk_mode: GPIO17_OUT
  phy_addr: 0
  use_address: 192.168.88.25

  manual_ip:
    static_ip: 192.168.88.25
    gateway: 192.168.88.1
    subnet: 255.255.255.0

# wifi:
#   # ssid: !secret wifi_ssid
#   # password: !secret wifi_password
#   ssid: "SmartHome"
#   password: ""

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  # ap:
  #   ssid: "Kc868-A16 Fallback Hotspot"
  #   password: "gCJlyJ5kec3y"


uart:
  - id: uart_modbus
    tx_pin: GPIO13
    rx_pin: GPIO16
    baud_rate: 9600


# Config Modbus
modbus:
  uart_id: uart_modbus
  id: modbus1

modbus_controller:
  - id: modbus_sensor
    address: 0x01  # device address
    modbus_id: modbus1
    update_interval: 10s

remote_receiver:
  pin:
    number: GPIO2
    ignore_strapping_warning: true

remote_transmitter:
  pin:
    number: GPIO15
    ignore_strapping_warning: true
  carrier_duty_percent: 100%

i2c:
  sda: GPIO4
  scl:
    number: GPIO5
    ignore_strapping_warning: true

pcf8574:
  - id: inputs_1_8
    address: 0x22
    pcf8575: false
  - id: inputs_9_16
    address: 0x21
    pcf8575: false
  - id: outputs_1_8
    address: 0x24
    pcf8575: false
  - id: outputs_9_16
    address: 0x25
    pcf8575: false


one_wire:
  - platform: gpio
    pin: GPIO32
    id: bus32


binary_sensor:
  - platform: gpio
    name: "KC868-A16-HT2"
    pin:
      number: GPIO33
      inverted: true

  - platform: gpio
    name: "KC868-A16-HT3"
    pin:
      number: GPIO14
      inverted: true

  - platform: gpio
    name: "input1_veranda_osv"
    pin:
      pcf8574: inputs_1_8
      number: 0
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input2_veranda_stolb_krylco"
    pin:
      pcf8574: inputs_1_8
      number: 1
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input3_veranda_osvechen"
    pin:
      pcf8574: inputs_1_8
      number: 2
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input4_krylco_veranda"
    pin:
      pcf8574: inputs_1_8
      number: 3
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input5_krylco_stolb"
    pin:
      pcf8574: inputs_1_8
      number: 4
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input6_krylco_osv"
    pin:
      pcf8574: inputs_1_8
      number: 5
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input7_veranda_rozetka"
    pin:
      pcf8574: inputs_1_8
      number: 6
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input8_podval_osv"
    pin:
      pcf8574: inputs_1_8
      number: 7
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input9_nasos"
    pin:
      pcf8574: inputs_9_16
      number: 0
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "input10_boiler"
    pin:
      pcf8574: inputs_9_16
      number: 1
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "KC868-A16-X11"
    pin:
      pcf8574: inputs_9_16
      number: 2
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "KC868-A16-X12"
    pin:
      pcf8574: inputs_9_16
      number: 3
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "KC868-A16-X13"
    pin:
      pcf8574: inputs_9_16
      number: 4
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "KC868-A16-X14"
    pin:
      pcf8574: inputs_9_16
      number: 5
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "KC868-A16-X15"
    pin:
      pcf8574: inputs_9_16
      number: 6
      mode: INPUT
      inverted: true

  - platform: gpio
    name: "KC868-A16-X16"
    pin:
      pcf8574: inputs_9_16
      number: 7
      mode: INPUT
      inverted: true


switch:
  - platform: gpio
    name: "Output01_podval_boiler"
    id: out_y01
    pin:
      pcf8574: outputs_1_8
      number: 0
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output02_podval_nasos"
    id: out_y02
    pin:
      pcf8574: outputs_1_8
      number: 1
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output03_podval_svet"
    id: out_y03
    pin:
      pcf8574: outputs_1_8
      number: 2
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output04_veranda_svet"
    id: out_y04
    pin:
      pcf8574: outputs_1_8
      number: 3
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output05_teplica"
    id: out_y05
    pin:
      pcf8574: outputs_1_8
      number: 4
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output06_podsvetka"
    id: out_y06
    pin:
      pcf8574: outputs_1_8
      number: 5
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output07_stolb"
    id: out_y07
    pin:
      pcf8574: outputs_1_8
      number: 6
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output08_rozetka"
    id: out_y08
    pin:
      pcf8574: outputs_1_8
      number: 7
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output09"
    id: out_y09
    pin:
      pcf8574: outputs_9_16
      number: 0
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output10"
    id: out_y10
    pin:
      pcf8574: outputs_9_16
      number: 1
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output11"
    id: out_y11
    pin:
      pcf8574: outputs_9_16
      number: 2
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output12"
    id: out_y12
    pin:
      pcf8574: outputs_9_16
      number: 3
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output13"
    id: out_y13
    pin:
      pcf8574: outputs_9_16
      number: 4
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output14"
    id: out_y14
    pin:
      pcf8574: outputs_9_16
      number: 5
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output15"
    id: out_y15
    pin:
      pcf8574: outputs_9_16
      number: 6
      mode: OUTPUT
      inverted: true

  - platform: gpio
    name: "Output16"
    id: out_y16
    pin:
      pcf8574: outputs_9_16
      number: 7
      mode: OUTPUT
      inverted: true

# substitutions:
#   update_interval: 1s

sensor:
  - platform: modbus_controller
    modbus_controller_id: modbus_sensor
    name: "Temperature Sensor"
    id: temperature_sensor
    address: 0x0001
    register_type: read
    value_type: U_WORD
    unit_of_measurement: "°C"
    accuracy_decimals: 1
    filters:
      - lambda: if (x < 10000) return x * 0.1; else return -1 * (x - 10000) * 0.1;

   
  - platform: modbus_controller
    modbus_controller_id: modbus_sensor
    name: "Humidity Sensor"
    id: humidity_sensor
    address: 0x0002
    register_type: read
    value_type: U_WORD
    unit_of_measurement: "%"
    accuracy_decimals: 1
    filters:
      - multiply: 0.1

  - platform: dallas_temp
    one_wire_id: bus32
    name: "DS18B20"
    update_interval: 30s


# web_server:
#   port: 80
#   auth:
#     username: "silver"
#     password: "cbvgcjy0"

mqtt:
  broker: 192.168.88.4
  username: 'miroca'
  password: 'cbvgcjy0'
  discovery: False # disable entity discovery
  discover_ip: True # enable device discovery