esphome:
  name: generator
  friendly_name: generator

esp32:
  board: esp32dev
  framework:
    type: esp-idf

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "/EFz4JsOw/FQu2RGJEmHg9+xm5/UdBeNbTd6mQbDN/U="

ota:
  - platform: esphome
    password: "0dac1ac3f1bae5208cc8ea81356da792"

wifi:
  ssid: "SmartHome"
  password: ""
  use_address: 192.168.88.27
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  # ap:
  #   ssid: "Kc868-A8 Fallback Hotspot"
  #   password: "gCJlyJ5kec3y"
  
  manual_ip:
    static_ip: 192.168.88.27
    gateway: 192.168.88.1
    subnet: 255.255.255.0

uart:
  - id: rs485
    tx_pin: GPIO27
    rx_pin: GPIO14
    baud_rate: 9600
  - id: rs232
    tx_pin: GPIO17
    rx_pin: GPIO16
    baud_rate: 9600

spi:
  clk_pin: GPIO18
  mosi_pin: GPIO23
  miso_pin: GPIO19
  # cs pin: GPIO5

i2c:
  sda: GPIO4
  scl:
    number: GPIO15
    ignore_strapping_warning: true

pcf8574:
  - id: inputs
    address: 0x22
  - id: outputs
    address: 0x24

time:
  - platform: ds1307
    id: rtc_time

binary_sensor:
  - platform: gpio
    id: "sw420_vibration"
    name: vibration
    pin:
      number: GPIO26
      mode: INPUT
    device_class: vibration
    filters:
     - delayed_off: 5s



  - platform: gpio
    name: "KC868-A6-IN-1"
    pin:
      pcf8574: inputs
      number: 0
      mode: INPUT
      inverted: true
  - platform: gpio
    name: "KC868-A6-IN-2"
    pin:
      pcf8574: inputs
      number: 1
      mode: INPUT
      inverted: true
  - platform: gpio
    name: "KC868-A6-IN-3"
    pin:
      pcf8574: inputs
      number: 2
      mode: INPUT
      inverted: true
  - platform: gpio
    name: "KC868-A6-IN-4"
    pin:
      pcf8574: inputs
      number: 3
      mode: INPUT
      inverted: true
  - platform: gpio
    name: "KC868-A6-IN-5"
    pin:
      pcf8574: inputs
      number: 4
      mode: INPUT
      inverted: true
  - platform: gpio
    name: "KC868-A6-IN-6"
    pin:
      pcf8574: inputs
      number: 5
      mode: INPUT
      inverted: true

switch:
  - platform: gpio
    name: "KC868-A6-RELAY-1"
    id: relay_1
    pin:
      pcf8574: outputs
      number: 0
      mode: OUTPUT
      inverted: true
  - platform: gpio
    name: "KC868-A6-RELAY-2"
    id: relay_2
    pin:
      pcf8574: outputs
      number: 1
      mode: OUTPUT
      inverted: true
  - platform: gpio
    name: "KC868-A6-RELAY-3"
    id: relay_3
    pin:
      pcf8574: outputs
      number: 2
      mode: OUTPUT
      inverted: true
  - platform: gpio
    name: "KC868-A6-RELAY-4"
    id: relay_4
    pin:
      pcf8574: outputs
      number: 3
      mode: OUTPUT
      inverted: true
  - platform: gpio
    name: "KC868-A6-RELAY-5"
    id: relay_5
    pin:
      pcf8574: outputs
      number: 4
      mode: OUTPUT
      inverted: true
  - platform: gpio
    name: "KC868-A6-RELAY-6"
    id: relay_6
    pin:
      pcf8574: outputs
      number: 5
      mode: OUTPUT
      inverted: true

one_wire:
  - platform: gpio
    pin: GPIO32
    id: bus32

  - platform: gpio
    pin: GPIO33
    id: bus33
  
sensor:
  - platform: ina219
    address: 0x40
    shunt_resistance: 0.1 ohm
    current:
      name: "INA219 Current"
      unit_of_measurement: "A"
    power:
      name: "INA219 Power"
      unit_of_measurement: "W"
      filters:
      - multiply: 10
    bus_voltage:
      name: "INA219 Bus Voltage"
      unit_of_measurement: "V"
    shunt_voltage:
      name: "INA219 Shunt Voltage"
      unit_of_measurement: "V"
    max_voltage: 32.0V
    max_current: 3.2A
    update_interval: 1s

  - platform: dallas_temp
    one_wire_id: bus32
    name: "DS18B20_motor"
    update_interval: 2s

  - platform: dallas_temp
    one_wire_id: bus33
    name: "DS18B20_temp2"
    update_interval: 10s
    

web_server:
  port: 80
  auth:
    username: "silver"
    password: "cbvgcjy0"


# mqtt:
#   broker: 192.168.88.4
#   username: 'miroca'
#   password: 'cbvgcjy0'
#   discovery: False # disable entity discovery
#   discover_ip: True # enable device discovery