Esphome

2026-02-14 00:24:59 +05:00
parent 20d79c9fb3
commit 8bb4fec06a
2 changed files with 101 additions and 235 deletions
--- a/bak.yaml
+++ b/bak.yaml
@@ -37,35 +37,15 @@ status_led:

    
  
-# switch:
-#   - platform: gpio
-#     pin: 
-#       number: GPIO5
-#       inverted: true
-#     name: Relay_komp
-#     id: relay
-    # on_turn_off:
-    #   then:
-    #     - wait_until:
-    #         condition:
-    #           for:
-    #             time: 5s
-    #             condition:
-    #               lambda: |-
-    #                 return id(relay).state == true;
-    #     - lambda: |-
-    #         id(relay).turn_off();
+switch:
+  - platform: gpio
+    pin: 
+      number: GPIO5
+      inverted: true
+    name: Relay
+    id: relay

-# one_wire:
-#   - platform: gpio
-#     pin: GPIO14
-#     id: bus14

-# sensor:
-#   - platform: dallas_temp
-#     one_wire_id: bus14
-#     name: "DS18B20_kontroller"
-#     update_interval: 2s

 binary_sensor:
  - platform: gpio
--- a/generator.yaml
+++ b/generator.yaml
@@ -33,262 +33,152 @@ wifi:
    gateway: 192.168.88.1
    subnet: 255.255.255.0

-remote_receiver:
-  pin: 15
-  dump:
-    - rc_switch
-  tolerance: 100%
-  filter: 250us
-  idle: 4ms
-  buffer_size: 4kb
-
-remote_transmitter:
-  pin: 2
-  # RF uses a 100% carrier signal
-  carrier_duty_percent: 100%
-
+uart:
+  - id: rs485
+    tx_pin: GPIO27
+    rx_pin: GPIO14
+    baud_rate: 9600
+  - id: rs232
+    tx_pin: GPIO17
+    rx_pin: GPIO16
+    baud_rate: 9600

+spi:
+  clk_pin: GPIO18
+  mosi_pin: GPIO23
+  miso_pin: GPIO19
+  # cs pin: GPIO5

 i2c:
-  sda: 4
-  scl: 5
-  scan: true
-  id: bus_a
-
-# ethernet:
-#   type: LAN8720
-#   mdc_pin: GPIO23
-#   mdio_pin: GPIO18
-#   clk_mode: GPIO17_OUT
-#   phy_addr: 0
-#   use_address: 192.168.88.27
-
-#   manual_ip:
-#     static_ip: 192.168.88.27
-#     gateway: 192.168.88.1
-#     subnet: 255.255.255.0
-#     dns1: 192.168.88.1
+  sda: GPIO4
+  scl:
+    number: GPIO15
+    ignore_strapping_warning: true

 pcf8574:
-  - id: 'pcf8574_hub_out_1'  # for output channel 1-8
+  - id: inputs
+    address: 0x22
+  - id: outputs
    address: 0x24

-  - id: 'pcf8574_hub_in_1'  # for input channel 1-8
-    address: 0x22
-
-
-# Individual outputs
-switch:
-  - platform: gpio
-    name: "a8-output1"
-    id: switch_output1
-    pin:
-      pcf8574: pcf8574_hub_out_1
-      number: 0
-      mode: OUTPUT
-      inverted: true
-
-
-  - platform: gpio
-    name: "a8-output2"
-    id: switch_output2
-    pin:
-      pcf8574: pcf8574_hub_out_1
-      number: 1
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "a8-output3"
-    id: switch_output3
-    pin:
-      pcf8574: pcf8574_hub_out_1
-      number: 2
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "a8-output4"
-    id: switch_output4
-    pin:
-      pcf8574: pcf8574_hub_out_1
-      number: 3
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "a8-output5"
-    id: switch_output5
-    pin:
-      pcf8574: pcf8574_hub_out_1
-      number: 4
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "a8-output6"
-    id: switch_output6
-    pin:
-      pcf8574: pcf8574_hub_out_1
-      number: 5
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "a8-output7"
-    id: switch_output7
-    pin:
-      pcf8574: pcf8574_hub_out_1
-      number: 6
-      mode: OUTPUT
-      inverted: true
-
-  - platform: gpio
-    name: "a8-output8"
-    id: switch_output8
-    pin:
-      pcf8574: pcf8574_hub_out_1
-      number: 7
-      mode: OUTPUT
-      inverted: true
+time:
+  - platform: ds1307
+    id: rtc_time

 binary_sensor:
-  - platform: remote_receiver
-    name: "remoter1"
-    rc_switch_raw:
-      protocol: 3
-      code: '000000111110110100001'
-    on_press:
-        - switch.turn_off: switch_output7
-        - switch.turn_on: switch_output6
+  - platform: gpio
+    id: "sw420_vibration"
+    name: vibration
+    pin:
+      number: GPIO26
+      mode: INPUT
+    device_class: vibration
    filters:
-      - delayed_off: 20ms
+     - delayed_off: 5s

-  - platform: remote_receiver
-    name: "remoter2"
-    rc_switch_raw:
-      protocol: 3
-      code: '000000111110110100010'

-    on_press:
-      - switch.turn_off: switch_output6
-      - switch.turn_on: switch_output7
-    filters:
-      - delayed_off: 20ms

  - platform: gpio
-    name: "a8-input1"
+    name: "KC868-A6-IN-1"
    pin:
-      pcf8574: pcf8574_hub_in_1
+      pcf8574: inputs
      number: 0
      mode: INPUT
      inverted: true
-    on_press:
-      - switch.toggle: switch_output1
-    on_release: 
-      - switch.toggle: switch_output1      
-        
  - platform: gpio
-    name: "a8-input2"
+    name: "KC868-A6-IN-2"
    pin:
-      pcf8574: pcf8574_hub_in_1
+      pcf8574: inputs
      number: 1
      mode: INPUT
      inverted: true
-    on_press:
-      - switch.toggle: switch_output2
-    on_release: 
-      - switch.toggle: switch_output2  
-
  - platform: gpio
-    name: "a8-input3"
+    name: "KC868-A6-IN-3"
    pin:
-      pcf8574: pcf8574_hub_in_1
+      pcf8574: inputs
      number: 2
      mode: INPUT
      inverted: true
-    on_press:
-      - switch.toggle: switch_output3
-    on_release: 
-      - switch.toggle: switch_output3
-
  - platform: gpio
-    name: "a8-input4"
+    name: "KC868-A6-IN-4"
    pin:
-      pcf8574: pcf8574_hub_in_1
+      pcf8574: inputs
      number: 3
      mode: INPUT
      inverted: true
-    on_press:
-      - switch.toggle: switch_output4
-    on_release: 
-      - switch.toggle: switch_output4
-
  - platform: gpio
-    name: "a8-input5"
+    name: "KC868-A6-IN-5"
    pin:
-      pcf8574: pcf8574_hub_in_1
+      pcf8574: inputs
      number: 4
      mode: INPUT
      inverted: true
-    on_press:
-      - switch.toggle: switch_output5
-    on_release: 
-      - switch.toggle: switch_output5
-
  - platform: gpio
-    name: "a8-input6"
+    name: "KC868-A6-IN-6"
    pin:
-      pcf8574: pcf8574_hub_in_1
+      pcf8574: inputs
      number: 5
      mode: INPUT
      inverted: true
-    on_press:
-      - switch.toggle: switch_output6
-    on_release: 
-      - switch.toggle: switch_output6

+switch:
  - platform: gpio
-    name: "a8-input7"
+    name: "KC868-A6-RELAY-1"
+    id: relay_1
    pin:
-      pcf8574: pcf8574_hub_in_1
-      number: 6
-      mode: INPUT
+      pcf8574: outputs
+      number: 0
+      mode: OUTPUT
      inverted: true
-    on_press:
-      - switch.toggle: switch_output7
-    on_release: 
-      - switch.toggle: switch_output7
-
  - platform: gpio
-    name: "a8-input8"
+    name: "KC868-A6-RELAY-2"
+    id: relay_2
    pin:
-      pcf8574: pcf8574_hub_in_1
-      number: 7
-      mode: INPUT
+      pcf8574: outputs
+      number: 1
+      mode: OUTPUT
      inverted: true
-    on_press:
-      - switch.toggle: switch_output8
-    on_release: 
-      - switch.toggle: switch_output8
-
  - platform: gpio
-    name: "a8-s3"
+    name: "KC868-A6-RELAY-3"
+    id: relay_3
    pin:
-      number: 32
+      pcf8574: outputs
+      number: 2
+      mode: OUTPUT
      inverted: true
-
  - platform: gpio
-    name: "a8-s4"
+    name: "KC868-A6-RELAY-4"
+    id: relay_4
    pin:
-      number: 33
+      pcf8574: outputs
+      number: 3
+      mode: OUTPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-RELAY-5"
+    id: relay_5
+    pin:
+      pcf8574: outputs
+      number: 4
+      mode: OUTPUT
+      inverted: true
+  - platform: gpio
+    name: "KC868-A6-RELAY-6"
+    id: relay_6
+    pin:
+      pcf8574: outputs
+      number: 5
+      mode: OUTPUT
      inverted: true
-

 one_wire:
  - platform: gpio
-    pin: GPIO14
-    id: bus14
+    pin: GPIO32
+    id: bus32
+
+  - platform: gpio
+    pin: GPIO33
+    id: bus33
  
 sensor:
  - platform: ina219
@@ -313,18 +203,14 @@ sensor:
    update_interval: 1s

  - platform: dallas_temp
-    one_wire_id: bus14
-    name: "DS18B20"
+    one_wire_id: bus32
+    name: "DS18B20_motor"
    update_interval: 2s
-    on_value_range: 
-      - above: 27.0
-        then:
-          - delay: 10s
-          - switch.turn_on: switch_output8
-      - below: 26.5
-        then:
-          - delay: 10s
-          - switch.turn_off: switch_output8
+
+  - platform: dallas_temp
+    one_wire_id: bus33
+    name: "DS18B20_temp2"
+    update_interval: 10s
    

 web_server: